Alpha ECG-125 Manuel d'instructions télécharger pdf (Page 25)

CHECKING THE GRINDING WHEEL FOR REPLACEMENT

1. Thegrindingwheelandspringloadedangearedesignedtobeself-adjusting.The

grindingwheelshouldoatontheangenutallowingittoadjusttotheheightofthe

brush assembly.

2. The grinding wheel should be replaced when the diamond segments are worn down

close to the hub and there are no visible diamond chips.

3. You also need to check the grinding wheel and diamond segments for chips, cracks

in the welds, or missing segments.

4. Continuing to use the grinding wheel when it is in need of replacement will prematurely

wearoutthebrushassemblyandthesystemwillnotworkefciently.

DANGER!

Do not use a grinding wheel that is chipped, cracked or missing diamond segments.

Diamond Segments

Welds

Figure-23 Figure-24

Checking the Grinding Wheel Diamond Segments

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Pas de commentaire

Alpha ECG-125 Manuel d'instructions Page 25